Products Description
|
Place of Origin |
Anhui, China |
|
Battery Type |
OPZS Battery |
|
Nominal Voltage |
2 Volt |
|
Nominal Capacity(10HR) |
1500.0AH (1.8V/cell,20°C) |
|
Length |
275±3mm (10.8 inches) |
|
Width |
210±3mm (8.27 inches) |
|
Container Height |
796±3mm (31.3 inches) |
|
Total Height (with Terminal) |
851±3mm (33.5 inches) |
|
Warranty |
3years |
|
Terminal |
Lead Terminal |
|
Container Material |
SAN Transparent Container |
|
Max. Discharge Current |
8000A (5s) |
|
Internal Resistance |
Approx 0.21mΩ |
|
Type and Number of Poles |
M8/4 |
|
Material |
High Pure Lead |
|
OEM/ODM |
Acceptable |
Product Advantages
●The 2V 1500Ah lead-acid battery has a design life of up to 15-20 years. They belong to the tubular pole plate structure battery, which has good deep discharge performance and high battery capacity, making them ideal for use with solar systems. Float charging and deep discharge cycles are all essential features of solar power. Jingsun's lead-acid batteries have a long float charging life and a strong recovery from deep discharge.
●The Jingsun tubular structure lead-acid battery has a cycle life of over 1600 cycles at 80% DOD. The main components are the plate grid, the sleeve and the active substance, and the pole plate is shaped like a tube. To enhance conductivity we usually use copper terminals. Its casing uses a SAN transparent container, which is acid resistant and hard to ensure no cracks, leaks overnight, etc.
●ABS highly flame-retardant material is used and the case is sealed between the lids using a sealant. The combination of a sealed mechanical seal and an adhesive seal ensures that there is no risk of leakage of the electrolyte. The exhaust plug is equipped with a flame arrestor and a safety plug for acid mist plugs, and the linker guarantees absolute insulation to ensure safety in use.

Product Parameters
|
Rated Capacity |
1500.0AH/150.0A |
(10hr,1.80V/cell,25°C/77°F) |
|
1332.0AH/266.4A |
(5hr1.75VIcell25°C/77°F) |
|
|
1156.5AH/385.5A |
(3hr,1.75V/cell25°C/77°F) |
|
|
856.5 AH/856.5A |
(1hr,1.60V/cell,25°C/77°F) |
|
|
Operating Temp.Range |
Discharge |
-15~50°C(5~122°F) |
|
Charge |
0~40°C(32~104°F) |
|
|
Storage |
-15~40°C(5~104°F) |
|
|
Charging |
Floating Voltage |
2.23V-2.25V at 20°C(68°F)Temp. |
|
Boost Charge |
2.30V-2.40V at 20°C(68°F)Temp |
|
|
Charging Current(max) |
0.1CA |
|
|
Temp.Coefficient |
-3mV/°C |
|
|
Capacity affected by Temperature |
40°C (104°F) |
103% |
|
25°C ( 77°F) |
100% |
|
|
0°C ( 32°F) |
86% |
|
|
Self Discharge |
Leoch OPzS batteries may be stored for up to 6 monthsat 20°C(68°F) and then a freshening charge is required.For higher temperatures the time interval will be shorter |
|
Constant Current Discharge (Amperes) at 20°C (68°F)
|
F.V/Time |
30min |
45min |
1h |
2h |
3h |
4h |
5h |
10h |
20h |
|
1.60V/cell |
1137.0 |
988.0 |
856.5 |
558.0 |
417.0 |
335.3 |
245.4 |
160.4 |
87.0 |
|
1.65V/cell |
1068.0 |
950.0 |
828.0 |
545.3 |
410.0 |
330.4 |
242.0 |
158.5 |
86.2 |
|
1.70V/cell |
1014.0 |
896.0 |
796.5 |
532.5 |
398.0 |
322.9 |
237.5 |
155.9 |
85.0 |
|
1.75V/cell |
951.0 |
854.0 |
756.0 |
510.0 |
385.5 |
313.1 |
231.8 |
153.3 |
83.6 |
|
1.80V/cell |
846.0 |
770.0 |
696.0 |
479.3 |
366.0 |
299.8 |
223.3 |
150.0 |
82.0 |
|
1.85V/cell |
675.0 |
638.0 |
595.5 |
435.0 |
335.0 |
277.4 |
210.3 |
143.6 |
78.8 |
Constant Power Discharge (Watts) at 20°C (68°F )
|
F.V/Time |
30min |
45min |
1h |
2h |
3h |
4h |
5h |
10h |
20h |
|
1.60V/cell |
1940.9 |
1729.0 |
1520.7 |
1014.7 |
763.7 |
619.4 |
527.4 |
302.9 |
164.9 |
|
1.65V/cell |
1862.7 |
1682.2 |
1482.3 |
996.5 |
754.7 |
613.5 |
523.0 |
300.8 |
164.2 |
|
1.70V/cell |
1792.8 |
1603.2 |
1436.6 |
977.4 |
736.1 |
601.5 |
513.7 |
296.9 |
162.5 |
|
1.75V/cell |
1709.7 |
1544.4 |
1376.5 |
942.9 |
717.5 |
586.4 |
502.5 |
293.3 |
160.5 |
|
1.80V/cell |
1541.6 |
1413.6 |
1283.5 |
894.0 |
686.4 |
564.7 |
484.0 |
288.5 |
158.3 |
|
1.85V/cell |
1250.8 |
1188.3 |
1114.3 |
820.5 |
635.0 |
527.8 |
457.6 |
278.4 |
153.5 |
Dimensions

Applications
2V1500Ah batteries are an important component of new energy technology applications. With the development of new energy technologies such as solar and wind power, the use of 2V1500Ah batteries for energy storage has become increasingly popular. The batteries are ideally suited for stationary applications, such as solar panel arrays and wind turbines. They provide a reliable source of energy storage, allowing the energy harvested during times of peak production to be used during times of minimal generation.
The use of 2V1500Ah batteries in new energy technologies provides several advantages. The batteries are relatively inexpensive compared to other technologies, and they can be used over long periods of time. This means that they are well-suited for long-term storage applications, such as powering large solar panel arrays and wind turbines during times of low generation. Additionally, they offer high capacity, stability, and reliability, making them an ideal choice for new energy technologies.


FAQ
Q:Do I have to use a dedicated solar lead-acid battery?
Q:What type of battery should I choose?
Q: Do your batteries need to be filled with liquid?





